Print this page

Image Of Stone From CNC Stone Cutting Machine  - CMS North AmericaCMS/Brembana's CNC stone cutting machines provide versatile solutions for a wide range of applications, from quarry blocks to countertops. The CMS/Brembana family of stone cutting equipment features mono bloc construction and fabricated steel weldments for superior durability and longevity. Spindles are cooled using closed loop glycol systems that extend working life. The CMS/Brembana line of stone cutting machines features metalized paint to prevent corrosion. Waterjet cutting functions are available on select models.

CONCEPT 13—CMS/Brembana's 3-4 interpolated axes machining center, designed for machining medium-thickness stone slabs and blocks. Concept can carry out any type of rough or polished edge contouring, as well as milling, drilling, countersinking, recessing, emptying, bas-relief or writing processes. Concept is ideal for small- and medium-sized workshops with space problems, that need to carry out a wide range of machining operations quickly and intuitively.

IMPACT—CMS/Brembana's 5 axis bridge saw, the right choice for all workshops operating in tight spaces and with limited investment needs. IMPACT, managed by a numerical control, is designed for cutting slabs and blocks of marble, granite, natural or composite stone. IMPACT carries out any type of machining: straight or shaped, vertical or inclined cuts, 3D profiling and emptying.

SPEED MB—CMS/Brembana's 3-4 interpolated axes monobloc machining center, designed for the machining of even ultra-thick slabs and blocks of marble, granite, natural and composite stone. Speed can carry out any type of rough or polished edge contouring, as well as milling, drilling, countersinking, recessing, emptying, bas-relief and engraving operations. Speed is the most widely sold machining center with producers and workshops and represents the state-of-the-art in terms of 3-4 axes machining

SPEED TR—CMS/Brembana's monobloc 3-4 axes numerical control machining center with revolving table (TR)—is the solution for nonstop machining cycles, with greatly reduced floor space requirements for the machining of natural stone, composite stone and similar materials. Speed TR's dual rotary bench makes possible the carrying out of loading/unloading and suction cups positioning operations in total safety on one work table while the machining center is operating on the other table. Speed TR is perfectly suited for companies demanding high production levels, and especially so for manufacturers involved with stone countertop machining work.

SPEED OF—CMS/Brembana's 3-4 axes numerical control machining center with masonry or steelwork separate-supports (Open Frame), for the machining of blocks and slabs of natural, composite stone and similar materials. Speed OF carries out all types of machining operations, such as drilling, milling, disk cutting, contouring, shaping, countersinking, recessing, emptying, polishing, sculpting, engraving and writing.

SPEED TR OF—CMS/Brembana's open frame (OF) 3-4 axes numerical control machining center with revolving table (TR)—is the solution for nonstop machining cycles, with greatly reduced floor space requirements for the machining of natural stone, composite stone and similar materials. Speed TR OF's dual rotary bench makes possible the carrying out of loading/unloading and suction cups positioning operations in total safety on one work table while the machining center is operating on the other table. Speed TR OF is perfectly suited for companies demanding high production levels, and especially so for manufacturers involved with stone countertop machining work.

SPEED TWIN OF—CMS/Brembana's 3-4 axes numerical control machining center with double worktable and separate-supports, for the machining of blocks and slabs of natural stone, composite stone and similar materials. The SPEED TWIN OF configuration makes possible working in an alternating mode; it's therefore possible to carry out loading/unloading, work area cleaning and suction cups positioning operations in total ​safety on one work bench concurrent to the machining center operating on the other one.

MAXIMA MB—CMS/Brembana's extremely versatile machining center, designed to work (ultra-thick) slabs and blocks of stony materials and compound stone accurately and quickly. Maxima can carry out any type of rough or polished edge contouring and surface machining, as well as any milling, drilling, countersinking, emptying, bas-relief and inscribing operations. Maxima represents the state-of-the-art in terms of 5-axis machining and is the ideal machining center for the marble cutter’s workshop.

MAXIMA OF—CMS/Brembana's 5/6 axes numerical control machining center with masonry or steelwork separate-supports (Open Frame), for the machining of blocks and slabs of natural, composite stone and similar materials. Maxima OF carries out all types of machining operations, such as drilling, milling, disk cutting, contouring, shaping, countersinking, recessing, emptying, polishing, sculpting, engraving and writing.

MAXIMA TWIN OF—CMS/Brembana's 5/6 axes numerical control machining center with masonry or steelwork separate-supports (Open Frame) with double worktable, for the machining of blocks and slabs of natural stone, composite stone and similar materials. The MAXIMA TWIN OF configuration makes possible working in an alternating mode; it's therefore possible to carry out loading/unloading, work area cleaning and suction cups positioning operations in total ​safety on one work bench concurrent to the machining center operating on the other one.

G-REX OF—CMS/Brembana's numerically controlled 5/6 interpolated axis large-sized machining center machining for working (ultra-thick) slabs, paving units and blocks of natural and compound stone. G-Rex's configuration can be customized according to various needs; G-Rex is specifically designed for marble workshops involved in architectural projects and in the building sector in general.

FORMAX OF—CMS/Brembana's numerically controlled 5-axis bridge sawing machine; mainly used for cutting marble, granite, natural or compound stone slabs and blocks measuring up to 3700 x 2500 mm. Formax can carry out any type of cutting (rectilinear or shaped, vertical or inclined), 3D profiling and emptying operations. Formax OF also comes in two additional versions to permit "flow through" machining capabilities. Formax provides an entry point with a smaller footprint and more limited options, and as such a lighter investment level.

FORMAX JET OF—CMS/Brembana's numerically controlled 5-axis bridge sawing machine for stone has been combined with its powerful Tecnocut waterjet system to make possible small kerf cuts, easily cut laminated buildup pieces for countertops, as well as cutting square inside corners. The Formax Jet OF is mainly used for cutting marble, granite, natural or compound stone slabs and blocks measuring up to 3700 x 2500 mm. Formax can carry out any type of cutting (rectilinear or shaped, vertical or inclined), 3D profiling and emptying operations in addition to all the capabilities of its combined waterjet system. Formax Jet OF provides an entry point with a smaller footprint and more limited options, and as such a lighter investment level.

SPRINT OF—CMS/Brembana's numerically controlled 5-axis bridge sawing machine; mainly used for cutting marble, granite, natural or compound stone slabs and blocks measuring up to 4250 x 2550 mm. Sprint can carry out any type of cutting (rectilinear or shaped, vertical or inclined), 3D profiling and emptying operations. Sprint OF also comes in two additional versions to permit "flow through" machining capabilities—Sprint RS OF (flow through with rollers) and Sprint BT OF (flow through with belt).

SPRINT JET OF—CMS/Brembana's numerically controlled 5-axis bridge sawing machine for stone has been combined with its powerful Tecnocut waterjet system to make possible small kerf cuts, easily cut laminated buildup pieces for countertops, as well as cutting square inside corners. The Sprint Jet OF is mainly used for cutting marble, granite, natural or compound stone slabs and blocks measuring up to 4250 x 2550 mm. Sprint can carry out any type of cutting (rectilinear or shaped, vertical or inclined), 3D profiling and emptying operations in addition to all the capabilities of its combined waterjet system. Sprint Jet OF provides an entry point with a smaller footprint and more limited options, and as such a lighter investment level.

GIXA—CMS/Brembana's 5-axis CNC sawing machine designed for cutting marble, granite, and stone blocks and slabs to the required size and shape. The GIXA range of CNC bridge saws is ideal for building suppliers (exterior coverings, stairs, fireplaces, window sills, cornices, fountains, doorsteps, curbstones, etc.), artistic monuments, gravestones, etc.

EASYLINE—The CMS Tecnocut Easyline Series provides customers an accurate and cost-effective entry-level waterjet cutting system. CMS Tecnocut's waterjet manufacturing technology, achieved through twenty years of experience, combined with the buying power of CMS Industries, results in a best value and top performance. The Easyline is a three-axis abrasive waterjet cutting robot that offers a cutting envelope up to 2 m (78") x 6 m (236"). It can easily cut aluminum, steel, titanium, and other metals, as well as stone, plastic, glass, and other materials.

MILESTONE S—waterjet cutting system was born from the meeting between CMS/Tecnocut's high technological experience and the needs of our customers. It has been studied for easy and performance oriented processing, it provides, due to its focus on the basic essentials, a configuration designed for high productivity, and at the same time one that pays great attention towards a safe working environment. Milestone S is particularly well suited for machining processes in the stone industry.

IDROLINE S—cutting performance, productivity demands, and environmental considerations have been combined in a technologically superior system named "Idroline S". The Idroline Series has raised the bar for waterjet cutting systems, making it unique in the market. It's thefirst waterjet system with an active method for controlling the speed and kerf of the jet; the first with a5 axis cutting head with continuous height following, and the first production waterjet system to provide an isolated cutting environment, providing for maximum operator safety and noise reduction. Idroline is able to perform the most demanding jobs, meeting the expectations of those requiring maximum performance from their cutting system.

IDEA—cutting performance, productivity demands, and capacity have been combined in a technologically superior system named "Idea". The Idea Series has raised the bar for large waterjet cutting systems, making it unique in the market. It is the first large waterjet system with an active method for controlling the speed and kerf of the jet; the first with a 5 axis cutting head with continuous height following. CMS/Tecnocut's Idea system is able to perform the most demanding jobs for large capacity cutting, meeting the expectations of those requiring maximum performance from a large format waterjet cutting system.