Stone Division
Accessories
CMS provides a wide array of Stone working accessories that help increase productivity. These rang anywhere from special vacuum cups to lathes, lasers, and transmissions. All these accessories are easily set up and are programmable via EasyStone
Accessories
VNT '
Vertical Nesting Technology is the latest in “fabcenter” technology. This system allows the user to place full slabs on the machine and take completely finished pieces off the machine with no user intervention. VNT achieves this using programmable vacuum cups that raise and lower automatically which is set by the software of your stone cutting machine.
Inside Square Sink Polish
This kit allows the machining and polishing inside a square corner under mount sink opening using a special 90 deg transmission and tooling
22.5 & 44 degree Mitre Transmission
Angular miter transmissions are available in both 45 deg and 22.5 deg and are available to the automatic tool change system.
Lathe
The mobile lathe is pinned to the machine bed for easy and accurate positioning, and yet removable depending on production needs. The fixed lathe Is integrated in the machine base and is capable of machining longer and heavier pieces
Vacuum Cups & Cones
A wide range of cups and cones to choose from, all designed and built with productivity and long life in mind
Laser Projector & Stand
An image of the tool path is projected onto the machine bed using a laser projector. Its main use is for positioning vacuum cups for slabs of stone and most often used in double table 3, 4 and 5 axis CNC machining center situations.
3D Laser Scanner
A system for laser scanning 3D objects or carvings and then duplicating them on the stone CNC machine with very little programming. These pieces can be scaled in the software so small carvings can be machined into larger pieces.